Rabu, 03 Maret 2010

setting modem tp link

Adsl Modem TP-Link


Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
  7. WAN Setup - Summary, Save
  8. Save/Reboot

dareglobal

Setting PPPoE:
  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  7. Cheklist Enable WAN Service, Service Name: Speedy, Next
  8. WAN Setup - Summary, Save
  9. Save/Reboot